Latest from Materials

Aleksandr Matveev | Dreamstime
Thiti Tangjitsangiem | Dreamstime
'Availability of new foundry sand is already becoming a challenge, along with the need of providing new solutions to waste management,” according to the director of a metallurgical research center.
'Availability of new foundry sand is already becoming a challenge, along with the need of providing new solutions to waste management,” according to the director of a metallurgical research center.
'Availability of new foundry sand is already becoming a challenge, along with the need of providing new solutions to waste management,” according to the director of a metallurgical research center.
'Availability of new foundry sand is already becoming a challenge, along with the need of providing new solutions to waste management,” according to the director of a metallurgical research center.
'Availability of new foundry sand is already becoming a challenge, along with the need of providing new solutions to waste management,” according to the director of a metallurgical research center.
Branimir Ritonja | Dreamstime
Automotive cast parts.
Automotive cast parts.
Automotive cast parts.
Automotive cast parts.
Automotive cast parts.
Seesea | Dreamstime
Fire photo
Fire photo
Fire photo
Fire photo
Fire photo
Jacek Sopotnicki | Dreamstime
With deoxidized base iron, carbon levels can be increased to 3.30% C and alloying can be completely or nearly eliminated at the same time.
With deoxidized base iron, carbon levels can be increased to 3.30% C and alloying can be completely or nearly eliminated at the same time.
With deoxidized base iron, carbon levels can be increased to 3.30% C and alloying can be completely or nearly eliminated at the same time.
With deoxidized base iron, carbon levels can be increased to 3.30% C and alloying can be completely or nearly eliminated at the same time.
With deoxidized base iron, carbon levels can be increased to 3.30% C and alloying can be completely or nearly eliminated at the same time.
Simone Neuhold / RHI Magnesita
Many refractory products are custom-developed and manufactured for particular applications, and also usually contaminated with material they have absorbed while lining furnaces or ladles, which makes the recycling process a challenge.
Many refractory products are custom-developed and manufactured for particular applications, and also usually contaminated with material they have absorbed while lining furnaces or ladles, which makes the recycling process a challenge.
Many refractory products are custom-developed and manufactured for particular applications, and also usually contaminated with material they have absorbed while lining furnaces or ladles, which makes the recycling process a challenge.
Many refractory products are custom-developed and manufactured for particular applications, and also usually contaminated with material they have absorbed while lining furnaces or ladles, which makes the recycling process a challenge.
Many refractory products are custom-developed and manufactured for particular applications, and also usually contaminated with material they have absorbed while lining furnaces or ladles, which makes the recycling process a challenge.
Foundrymag 857 Pentonlogosm2 1 0
Foundrymag 857 Pentonlogosm2 1 0
Foundrymag 857 Pentonlogosm2 1 0
Foundrymag 857 Pentonlogosm2 1 0
Foundrymag 857 Pentonlogosm2 1 0

Weekly Updae April 14, 2009

April 14, 2009
GM supplier files bankruptcy U.S. Aluminum gets Boeing quality endorsement To focus improvement efforts, find the leverage point
View this email as a Web page Please add FDRY_Foundry Management_ to your Safe Sender list.
Foundry M&T Home Page | Issue Archives | Buyer's Guide | Forums | REB Blog | Contact Us Weekly UpdateApril 14, 2009
This Week's Metalcasting News Review
GM Supplier Trimag Seeks Bankruptcy
The decision follows the loss of its major customer General Motors Corp., to which Trimag had supplied nearly all of its high-pressure diecastings. GM cancelled its business with Trimag due to low automotive demand. Read more
Cat, Navistar Launching New Truck Lines
The JV will produce heavy-duty vocational trucks for sale in North America, and will form a 50/50 joint venture to “pursue global commercial truck opportunities” elsewhere in the world. Read more
U.S. Aluminum Castings Gets Boeing Quality Endorsement
Boeing’s SQS Suppliers are not required to request a source inspection for the release of completed castings. Read more
Featured This Week
To Focus Improvement Efforts, Find the “Leverage Point”
The "Ultimate Improvement Cycle" is based upon principles associated with Lean, Six Sigma, and the Theory of Constraints, but it is unique in that it capitalizes on a time-released formula for use of the key tools, techniques, principles, and actions of all three initiatives focused on the right area. Read more
Forums And Blogs
REB Blog: Ripple effects
" … we need economic policies, business strategies, and personal habits that encourage growth." Read more
Announcements
Foundry Management & Technology announces launch of Foundry Theater. Watch videos about foundry and diecasting industries. You'll see technical developments; new equipment; finishing technologies; automation systems; quality instruments and new products. You'll see how to reduce cycle times and increase productivity Watch Videos Now
Case Studies / Whitepapers Sponsored case studies from the Foundry Management & Technology collection provide real-world accounts of what's happening in the foundry industry. They chronicle the events faced by business owners and managers who had to deal with changes in the competitive environment, and plots the owners' or managers' response which usually involves a change in their business strategy. Latest case studies added to the Foundry M&T collection:
Intelligent Demand ResponseImpact Markers Support Manufacturing's Desire to Apply Green Manufacturing TechniquesFor Foundries, Necessity is the Mother of InventionClick Here or on the links above to start reading.
FM&T Hall of Honor
The FOUNDRY Management & Technology Hall of Honor recognizes men and women whose technical and process innovations; organizational leadership; professional and industrial standards; and personal contributions and achievements have improved and enhanced metalcasting as a science, as an industry, and as a community. Help us identify the next metalcaster to join the FM&T Hall of Honor. Read more
Upcoming Events
Aluminum Assn. Spring Meeting
San Antonio, TX — April 20-22, 2009 Read more
2009 SAE World Congress
Detroit — April 20-23, 2009 Read more
NADCA's Die Cooling Systems Engineering Course
Wheeling, IL — April 21-22, 2009 Read more
ISRI Annual Convention & Expo
Las Vegas — April 26-30, 2009 Read more
Copyright© 2009 Penton Media, Inc. All rights reserved. Penton Media's Privacy Policy

Thank you for reading FOUNDRY's Weekly Update. You are subscribed as #email#. To find out how to get your message in front of our qualified subscribers, please e-mail Christian Webb at [email protected].

To unsubscribe, please click here.

Foundry Management & Technology
The Penton Media Building
1300 E. 9th Street
Cleveland, OH 44114-1503
(216) 931-9504
Fax: (216) 696-7932