Foundry Magazine
Foundry Channels
  METALS & ALLOYS   MELTING   REFRACTORIES   SAND & BINDERS   POURING & FILTERING   COREMAKING   MOLDING   SIMULATION   AUTOMATION   PROCESS CONTROL   SHAKEOUT, CLEANING,
  & FINISHING
  HEAT TREATING   TESTING, MEASURING,
  & QUALITY CONTROL
  ENVIRONMENT, HEALTH,
  & SAFETY
CASE STUDIES USEFUL LINKS SUBSCRIPTIONS CONTACT US
 
Coremaking
channel news and features
For All News & Features   |   To Subscribe to the RSS Feed
Results : 1 - 5 of 44
Simulating Porosity Factors
Numerical modeling tools are commonplace, but the core-gas blow defect is rarely understood because the causes are so difficult to determine. FLOW-3D software helps model core-gas flow, leading to better quality castings

CastExpo ‘10 Preview
A week in the sun never sounded so good. For metalcasters enduring weak demand and idle production, the fresh ideas and technical insights upcoming at CastExpo will seem even more welcome than a few days of warm weather and relaxation.

Dual-Station Coremaking Productivity
One operator, two jobs simultaneously — significatly increasing productivity and reducing cost-per-core.

Pneumatic Hot Melt Glue Gun for Sand Cores
Faster, more efficient bonding than water-based glues.

Report: Blackhawk Foundry Near Asset Sale, Closing
Ductile iron producer in agreement with unnamed buyer
channel events
For All Events   |   To Subscribe to the RSS Feed
Results : 1 - 2 of 2
Analysis of Casting Defects
Internet Based Course
September 5, 2007
Green Sand Control
Internet Based Course
September 17, 2007
channel products
For All Products   |   To Submit a New Product
Results : 1 - 4 of 4
Automatic Decoring
06/01/08
RIMROCK introduces its latest device for automated decoring of castings, the Twistmaster 400, available from its Austrian partner, FILL. It offers acceleration values over...
ArenaFlow 7.0
12/01/07
ASHLAND'S latest version of ArenaFlow (version 7.0) includes a new solver that delivers improved performance as well as experimental data agreement. The new improvements...
Speeds Up Rapid Prototyping and Manufacturing
06/01/07
STRATASYS' new build option increases throughput up to 50%, employing a new layer thickness, measuring 0.013 inch. This is best suited to larger geometry, where the...
New Products: Alignment Prints and Coreboxes
10/01/06
Alignment Prints and Coreboxes ADOLF’S PATTERN SHOP is offering two of the most requested sizes of alignment cores (2.55 in. and 3.57 in.), used in greensand and...