Latest from Issues and Ideas

Natalie Schorr | Dreamstime
U.S. Steel signage, Edgar Thomson Works, Braddock, Penn.
Thossaphol Somsri | Dreamstime
Gas turbine-powered electric utility plant.
Smoczyslaw | Dreamstime
Copper wire in an electric motor assembly.
Pennsylvania State University
Concept for AM-produced shape-memory-alloy (SMA) radiator .
Ilja Enger Tsizikov | Dreamstime
Transmission towers and electrical substation, at sunset.
Andrey Popov | Dreamstime
Illustrated digital human hand and businessman, arm wrestling.
Pratt & Whitney
Engine assembly at Pratt & Whitney in Middletown, Conn.

Filtering: Applications of Ceramic-foam Filters

Feb. 19, 2006
Structure offers low resistance to fluid flow, acts as a filter

Every foundry manager knows that inclusions lead to poor casting surface quality, deterioration of mechanical properties, poor machinability, casting permeability, and gas bubbles. Fortunately, there are ceramic-foam filters to address these problems.

Ceramic-foam filters — which look very much like sponges — are characterized by an open-pore reticulated structure with porosity that exceeds 90% and a very high surface area. This structure offers low resistance to fluid flow, making it useful as a filter. When molten metal flows through a ceramic-foam filter, it takes a tortuous path, effecting the removal of very small inclusions by attraction and adsorption to the internal ceramic-pore structures. The structure works so well, in fact, that ceramic-foam filters are the most efficient filters for removing inclusions from molten metal.

To read the complete report, subscribe to the Foundry Management & Technology free digital edition.