Universal Molding Machine

The UMM tooling frames were designed to accept cope / drag no-bake boxes where they are mounted back to back and run matchplate style, as well as any type or size of green sand tooling. The ability to accept either green sand or No-bake tooling is an innovation that allows any modern jobbing metalcasting foundry to be flexible with their production and more efficient.

The UMM is the pinnacle in automated molding as it takes carousel molding to an entirely new dimension by its ability to use existing green sand tooling to make no-bake molds. Green sand matchplates only need a simple 2x wooden box mounted to both sides and then fastened to the tooling frame, and No-Bake patterns are simply mounted to the tooling frames as is.

UMM Production Rates

Production rates of 20 molds per hour with the 2-station UMM are easily achieved with one operator. Mold per hour rates of 65 are reached with 2 – 3 operators with a 6-station UMM.

No Rollover Needed

The greatest advantage of the Palmer UMM is that high mold production rates can be achieved WITHOUT A ROLLOVER! Because the pattern is inverted automatically and drawn onto a precision scissors lift, a rollover isn't necessary and any amount of daylight is available at no additional expense.

Therefore, a standard UMM can draw a 4" deep box and then draw a 36" or deeper box – AT NO ADDITIONAL COST! The Palmer UMM is truly a revolutionary system. A UMM system, complete with a mixer can be purchased and installed for less than the cost of just a rollover in a traditional loop.

Capacities

UMM 2 or 6-stations capacities:

• Mold Sizes: 12x12 4/4 to 60x60 36/36
• Mold Depth: up to 36"
• Stations: 2 or 6

Flip Molding Machine

The FMM uses Cast Iron Tooling Plates that were designed to accept cope/drag no-bake boxes.

FMM Production Rates

Production rates of 30 molds per hours with a 4-station FMM are easily achieved with 1-2 operators, depending on level of mold prep needed.

No Rollover Needed

Like the UMM, the FMM achieves a high mold production rate without a rollover. Because the pattern is inverted automatically and drawn onto a precision scissors lift, a rollover isn’t necessary and any amount of daylight is available at no additional expense.

FMM Capacities

FMM 4-station capacities

• Mold Sizes: 12x12 4/4 to 60x60 36/36
• Mold Depth: up to 36”
• Stations: 4

Learn more